Flooring

A high strength, polymer-modified, cement-based, protein-free, subfloor smoothing underlayment, giving a level screed from 2mm up to 30mm thick. FAST-FLEX FLOOR LEVELLER incorporates specially blended cement, graded sands, built-in polymer, anti-shrink agents and super-plasticisers, which when mixed with water give optimum levelling properties over a comprehensive range of floor surfaces such as tamped or worn concrete and sand/cement floor screeds, plywood and dense impermeable surfaces. It is also suitable for heated sub-floors. Conforms to EN 13813: CT: C30-F7

A 2-Part bag & bottle, polymer reinforced levelling underlayment giving a rapid-setting, super-smooth floor finish with outstanding high early strength, due to its specially formulated rapid curing binders, which are free from Portland cement to maximise early hydration & rapid drying with high early strength development. It exhibits excellent “primer-free” adhesion to WBP plywood, existing tiles, dense impermeable substrates, old hardened adhesive residues and floors fitted with sub-surface heating elements. Conforms to EN 13813: CT: C30-F7.

GYP-LEVEL is primarily recommended for application over a pre-existing anhydrite floor screed without the need for applying a barrier seal. This product can also be applied to other commonly encountered surfaces such as flooring grade plywood overlay, existing ceramic & vinyl tiles as well as concrete* & sand/cement screed*, both of which will require pre-sealing before levelling over with GYP-LEVEL.

MULTI-PRIME is a styrene-butadiene copolymer emulsion for use as a primer and sealer to improve the receptiveness of a receiving substrate by either priming, stabilising or sealing prior to the application of a Palace Self-Levelling compound. MULTI-PRIME increases the adhesion and prolongs the flowable working time of a leveller, whilst also improving initial coverage and reducing the occurrence of pinholes. It can be used on both porous and non-porous surfaces, internally and externally and will assist with optimising adhesion strength and the long-term durability of the bond to the surface substrate. MULTI-PRIME applied over a pre-existing Calcium Sulphate (Gypsum / Anhydrite) floor screed gives a barrier at the cement to gypsum bond interface which prevents any subsequent adverse reaction between the two chemically different compounds. MULTI-PRIME can be used as a water-proof bonding agent when mixed as a slurry with neat cement and can readily be incorporated into sand cement repair mortars, giving a water-reducing & plasticising effect, improving compressive strength and adhesion of the mortar to the existing base masonry.

A dual-purpose heavy-duty, wear-resistant, polymer-modified, (mix with water) cement-based smoothing compound for use as an interior / exterior underlayment, or as a wear surface topping. It is intended for use as a high-performance heavy-duty underlayment or as a durable finished surface topping. WEAR-TOP gives an ideal surface to receive resin floor coatings and can be laid from 5mm up to 15mm in depth. Its fast setting properties allows foot traffic after 3 hours and is ready to receive vehicle traffic after 36 hours. Conforms to EN 13813: CT: C40-F10.