FREE delivery for orders above £450.

Shower-Tight Tanking Kit

Code: TF5789

A waterproof barrier system to protect water sensitive structures and surfaces in tiled areas where regular and exposure to damp conditions are expected, such as showers, bathrooms and kitchen utility areas. This multi-component kit consists of a surface primer; a flexible liquid-applied waterproof membrane and super strong polyester tape & matting to reinforce all seams & joints around wall floor junctions and where piping enters and exits the wet zone.

£29.99 £35.99 Inc VAT

The delivery charge is £42 for orders below £450. Orders above £450 qualify for free delivery. Delivery lead time is 5 working days from the date of the order. We advise that customers wait for their goods to be delivered before arranging work to be undertaken. Building Materials Wholesale may not be held liable for any failure to deliver by any stated time or date or any consequential loss resulting from late delivery. See Full Transport Policy

In Stock

Description

Description

PALACE SHOWER-TIGHT is a waterproof barrier system designed to protect water sensitive structures and surfaces in tiled areas where regular and frequent exposure to damp conditions is expected, such as showers, bathrooms, wet rooms and kitchen utility areas. This multi-component system consists of a surface primer to ensure good adhesion to the substrate; a grey flexible waterproof coating to prevent the passage of moisture and super strong polyester matting to reinforce seams in joints around wall floor junctions and where piping enters and exits the wet zone. This provides a seamless, durable protective membrane to inhibit the passage of moisture from within the tiled area through to surfaces and structures which may be sensitive to the effects of prolonged water migration, such as plaster, render, plasterboards, tile backer boards, timber, suspended floors and plywood overlays. The SHOWER- TIGHT barrier system is flexible enough to accommodate any slight movement or vibration which may be expected under normal conditions of use in and around well constructed, structurally stable floors, walls, showers and utility fittings.

Surface Preparation:

New concrete or plaster surfaces should be allowed at least 6 weeks to adequately dry out before SHOWER-TIGHT is applied. Timber and boarded structures must be rigidly braced and sufficiently constructed to withstand anticipated loading without flexing, deformation or any movement around joints and seams. Timber floors and walls must also have sufficient ventilation from behind and below to avoid interstitial condensation. Surfaces to be coated must be clean, dry and free from oil, grease and any other contaminants. Seal all gaps, joints and cracks with MULTI-PURPOSE SILICONE SEALANT or in wider gaps a suitable repair compound and then allow this to fully cure before proceeding. Ensure the finished surface is sufficiently level and even to accommodate a flat regular tiled finish and any floor surface inclines running to a drain point are true and ensure water flows off in the correct direction. When the wet-zone area is structurally sound, prime all surfaces (floors and walls) with a single coat of PALACE TILERS PRIMER and then allow this to dry.

Application Method:

When the surface is adequately prepared and the primer coat has dried, PALACE SHOWER-TIGHT waterproof coating should first be brush or roller applied generously around all horizontal and vertical joints, corners, cracks and seams in and around the backing surfaces and at the joints surrounding pipe penetrations and drainage gullies. Whilst this coating is still wet, press in the polyester tape along and bridged over the seam line around all surface joints and fittings and at the junction between different surface materials. When all the joints and edge seams are sufficiently sealed with polyester tape apply a second coat of PALACE SHOWER-TIGHT to seal in the polyester tape where necessary. As the taped seams dry out use a brush or roller to apply an even and consistent coating over all exposed wall surfaces including the taped & sealed joints.
Once the wall area is treated, on any floor areas exposed to the most frequent wetting and trafficking i.e. below the shower point, apply a coat of SHOWER- TIGHT across the floor ad then cut to size (if necessary) and evenly press out the square metre of polyester matting, leaving no creases or wrinkles, whilst ensuring it accurately accommodates any drain points. When the polyester matting has dried into place, generously apply a second coat PALACE SHOWER-TIGHT waterproof coating over all previously laid polyester covered based and then out across all exposed previously taped wall and floor joints within the defined wet-zone area. Allow 24 hours for PALACE SHOWER-TIGHT waterproof coating to dry out and re-apply a fresh coat over any voids or areas where the first application has failed to achieve sufficient coverage

Fixing tiles on SHOWER-TIGHT:
Walls sealed with PALACE SHOWER-TIGHT should be treated as impermeable surfaces and joints around tiles fixed using ready mixed waterproof wall tile adhesives such as PALACE AQUATILE should not be grouted until up to 7 days after fixing. Porcelain or large format tiles (greater than 300mm x 300mm) should be fixed to walls using a polymer-modified cement-based adhesive such as PALACE MULTI-FLEX or EASI-FLEX. Floor surfaces in wet zones sealed with SHOWER-TIGHT should always be tiled over using the same polymer-modified cement-based adhesives as recommended above for large format tiles. Under tile heating mats can be fixed to the SHOWER-TIGHT membrane and then be tiled over using MULTI-FLEX or EASI-FLEX polymer-modified cement-based adhesives. PALACE SHOWER-TIGHT should not be left as a final exposed wearing surface, nor should it be used in external locations or where the tiled area is intended for permanent & continuous water immersion when PALACE DAMPSHIELD should then be used as a more suitable waterproof tanking membrane where hydrostatic water pressure is anticipated.

Coverage:

Depends on the surface texture and porosity, however on a typically smooth, even surface PALACE SHOWER-TIGHT waterproof coating will cover at about 2 – 3 square metres per litre. The pack as supplied is sufficient to cover 5 square metres which is equivalent to a single domestic shower cubicle.

Storage & Packaging:

PALACE SHOWER-TIGHT is supplied with 1 litre of TILERS PRIMER; 2.5 litres of waterproof coating; 10 linear metres of 100mm wide polyester tape and 1 square metre of polyester matting. Should more technical information be required, contact the Technical Helpline on 0151 486 6101.

Specifications

Additional information

Application

Floor, Wall

Brand

Palace Chemicals

Colour

Grey

Product Form

Liquid

Product Type

Primer, Waterproof Membrane

Size

2.5 L

Product Documents

Technical Data Sheet

Download

Material Data Sheet

Download

Questions & Answers

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Customer Product Reviews

Reviews

There are no reviews yet.

Be the first to review “Shower-Tight Tanking Kit”
Review Title

Your email address will not be published.

one × five =